bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

90 Troubleshooting > < 4 RA Removing And Installing _ Replacing Relief Relay (EDC)
Page 1
background image

61 36 540

Replacing relay for air supply unit

Important!

Extreme cleanliness must be ensured in area of air line
connections during removal and installation.

Even the smallest of dirt particles can cause leakage in the
system.

Necessary preliminary tasks:

Pull fuse for control unit

Remove luggage compartment floor trim panel

Remove spare wheel

Important!

Do not kink, twist or crush pipes.

Unfasten screws.

Tightening torque  37 22 1AZ

.

Turn air supply system over.

Detach relay (1).

RA  Replacing relay for air supply unit

BMW AG - TIS

04.02.2013  05:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

90 Troubleshooting > < 4 RA Removing And Installing _ Replacing Relief Relay (EDC)