7 Series E65 730d (M57TU) SAL
41 00 156
Replacing left front end with bulkhead
support carrier
Read contents of Body, General.
Spot-weld bonding is used for the first time on the E65. A
specific procedure must be followed here.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, front
-
(2) Support carrier, wheel arch, outer
-
(3) Retaining bracket
-
(4) Mounting, cross-member
Open weld joints in areas (1).
Remove support carrier (2).
Open weld joints in areas (1).
RA Replacing left front end with bulkhead support carrier
BMW AG - TIS
04.02.2013 05:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -