7 Series E65 730d (M57TU) SAL
41 35 102
Replacing rear left side panel (partial
replacement before longitudinal member
cover)
Read contents of Body, General.
Spot-weld bonding is used for the first time on the E65. A
specific procedure must be followed here.
Following new body parts are required (refer to EPC):
-
(1) Partial section, rear side panel
Mark severance cuts in accordance with specified measurements and cut.
Caution!
Cut outer metal sheet only.
Sunroof water drain hose is located behind severance cut a.
Measurement a = approx. 100 mm from roof edge.
RA Replacing rear left side panel (partial replacement before longitudinal member c
BMW AG - TIS
04.02.2013 06:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
