7 Series E65 730d (M57TU) SAL
41 63 003
Replacing cover bowl
Necessary preliminary tasks:
•
Remove flap for fuel filler neck.
•
Remove actuator drive for tank filler flap.
Lever out ejector (1) in direction of arrow.
Press retaining strap (2) inwards and remove.
Lever out seal (3) from cover bowl (4).
Turn cover (1) through approx. 45
°
and lever out in direction of
arrow.
Lever out cover bowl (3) at rear over opening (2).
Installation:
Catches (1) on ejector (2) must not be damaged.
Fit cover cap (3) correctly.
RA Replacing cover bowl
BMW AG - TIS
04.02.2013 06:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
