7 Series E65 730d (M57TU) SAL
51 13 220
Removing and installing / replacing middle
trim strip on rear lid
Special tools required:
•
00 9 318
Note:
Minimum object temperature of trim strip and body
≥
18
°
C.
If this temperature is not achieved, the components must be
preheated.
Removing trim strip:
Carefully detach trim strip (1) from rear lid (2) with special tool
00 9 318 and hot air blower.
Note:
Trim strip (1) cannot be reused.
Cleaning rear lid:
For cleaning, use a fluff-free disposable cloth or a clean cleaning
cloth.
Clean adhesive area of rear lid with spirit.
Air drying time at least 1 minute.
Do not grip bonding surface.
RA Removing and installing / replacing middle trim strip on rear lid
BMW AG - TIS
04.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
