7 Series E65 730d (M57TU) SAL
51 16 367
Removing and installing right glovebox (with
active knee protector) with housing
Warning!
Version with active knee protector:
Follow safety instructions for working on cars with airbag
systems.
Important!
Do not use any sharp-edged tools to remove the glovebox
(risk of damage to active knee protector).
Necessary preliminary tasks:
•
Remove trim for instrument panel at bottom right
•
Disconnect battery negative lead
Release screws (1) and (2).
Pull glovebox (3) with housing towards rear until Bowden cable is
accessible.
Version up to MY 2004:
Lever out lock (1) towards front and detach Bowden cable (2).
Version from MY 2005:
Lever out lock (1) towards rear and detach Bowden cable (2)
upwards.
Unhook Bowden cable nipple (3).
RA Removing and installing right glovebox (with active knee protector) with housing
BMW AG - TIS
04.02.2013 07:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
