7 Series E65 730d (M57TU) SAL
Enabling seat occupancy detector (OC3 mat):
•
Connect BMW diagnosis system
•
Release seat occupancy detector
•
Clear fault memory if necessary
Remove cover (1) on front seat:
•
Press clip on door side outwards
•
Press clip on tunnel side upwards
•
Pull cover (1) forwards out of seat mechanism
Unhook seat cover on at all retaining points (1).
Remove seat cover with support.
If necessary, disconnect all plug connections.
Version with OC3 mat:
-
OC3 mat must not be kinked under any circumstances.
Detach all retainers in side area from longitudinal wires (1).
Pull trim wires (1) forward out of seat cover.
Carefully fold back seat cover and release retainers from cross-
wires (2).
Remove seat cover from support.
Important!
Remove all remnants of clips from seat cover and support.
RA Replacing seat cover for left or right front seat (normal/electric)
BMW AG - TIS
04.02.2013 09:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -