7 Series E65 730d (M57TU) SAL
61 35 177
Removing and installing (replacing) rain/light
sensor
Expand two-part mirror base cover (1) by pressing from below
and detach.
Feed out two-part mirror base cover (1) and remove.
Disconnect plug connection (3).
Press locks (1) in direction of arrow and remove rain/light
sensor (2) towards bottom.
Installation:
Do not damage optical element covered by rain/light sensor (2).
If necessary, initialise rain/light sensor.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car & key memory
•
CD "CIP"
RA Removing and installing (replacing) rain/light sensor
BMW AG - TIS
04.02.2013 10:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
