7 Series E65 730d (M57TU) SAL
Version A (water jet hose connected):
Disconnect plug connection (1).
Important!
Risk of damage!
At low outside temperatures, carefully heat water jet hose (2)
in area of distributor with hot air blower.
Turn water jet hose (2) and pull off in direction of arrow.
Unscrew nuts (3).
Version B (quick-release coupling):
Note:
Windscreen wiper arm shown removed for purposes of clarity.
For releasing, push slide (2) of quick-release in direction of arrow
until it snaps audibly into place.
Pull off hose (1).
Disconnect associated plug connection and release nuts.
Note:
Operation is shown by way of example on the left windscreen
wiper arm.
Important!
Risk of breakage!
Do not bend windscreen wiper arm when removing.
Detach windscreen wiper arm with special tool 61 6 060 .
Note:
Installation of windscreen wiper arm is described separately from
removal.
Replacement:
•
Convert windscreen wiper blade
•
Convert cover with hose in windscreen wiper arm
RA Removing and installing (replacing) right windscreen wiper arm (passenger side)
BMW AG - TIS
04.02.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -