7 Series E65 730d (M57TU) SAL
Version B (quick-release coupling):
Note:
Windscreen wiper arm shown removed for purposes of clarity.
Check sealing ring on distributor for damage, replace if necessary.
Coat sealing ring with anti-friction agent.
Push water jet hose (1) in direction of arrow onto distributor.
Make sure water jet hose (1) and slide (2) are correctly seated
and engaged on distributor.
Close associated plug connection.
Clip cover caps onto nuts (2) and (3).
Make sure cover caps are correctly engaged.
Perform one-touch wiping twice.
Check adjustment dimension between windscreen wiper blade (1)
and cowl panel trim and adjust if necessary.
Check contact angle of windscreen wiper arm to windscreen and
adjust if necessary.
RA Removing and installing (replacing) right windscreen wiper arm (passenger side)
BMW AG - TIS
04.02.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
