7 Series E65 730d (M57TU) SAL
Build date up to 03/2005:
Disconnect plug connection (1) and remove cover cap for
headlight vertical aim adjuster (2).
Release screws (3).
Feed out headlight vertical aim adjuster (4) in direction of arrow
and remove.
Installation:
Feed ball head (1) of headlight vertical aim adjuster (2) in
direction of arrow into mounting (3).
Pass headlight through removed cover cap for low-beam headlight
to facilitate the feed-in process. Ball head (1) must audibly snap
into place in mounting (3).
Build date from 03/2005:
Disconnect plug connection (1).
Release screws (2) and slide headlight vertical aim adjuster to
left and remove towards rear.
Installation:
Move ignition unit (1) in direction of arrow until mounting (2)
approaches opening.
RA Removing and installing/replacing left headlight vertical aim adjuster (xenon he
BMW AG - TIS
04.02.2013 11:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
