7 Series E65 730d (M57TU) SAL
Installation:
Note different screw lengths:
•
1=Long screw
•
2=Short screw
Remove screws (1) and (2).
Pull off cover (3) in direction of arrow.
Caution!
Protect wiring harness (1) against damage.
Unclip plug (2).
Detach frame (3) in direction of arrow from cooler box (4).
Installation:
Make sure wiring harness (1) is correctly laid.
Release screws (1).
Remove cover (2) in direction of arrow.
Caution!
Note markings on cables for pin assignment on circuit board.
RA Removing and installing/replacing cooler box cooling unit
BMW AG - TIS
04.02.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
