7 Series E65 730d (M57TU) SAL
Note:
Disconnect fuel line on independent heater with special tool
13 3 010 .
Recycling:
Fuel escapes when fuel line is detached. Have a suitable
collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Disconnect plug connections (1) and (2).
Caution!
To avoid damaging the independent heater, it is absolutely
essential to adhere to the following contacting sequence for
the plug connections:
1.
Plug connection (1)
2.
Plug connection (2)
Release hose clamps (3).
Disconnect fuel line (1).
Disconnect water hoses (2).
Release screws (3).
Detach independent heater (4) in direction of arrow from
fixture (5).
Installation:
Make sure exhaust system (6) is correctly seated.
Top up coolant and vent cooling system.
RA Removing and installing complete independent heater
BMW AG - TIS
04.02.2013 12:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -