7 Series E65 730d (M57TU) SAL
64 51 590
Removing and installing/replacing evaporator
(Basic automatic A/C)
Warning!
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant R 134a .
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Note:
If A/C system is opened for more than 24 hours:Replacing drier
insert for A/C system
Necessary preliminary tasks:
•
Draw off refrigerant from A/C system
•
Remove trim panel for pedal assembly.
After installation:
•
Evacuate and fill A/C system
Procedure is described in the document "Removing and
installing/replacing evaporator (automatic A/C High)".
RA Removing and installing/replacing evaporator (Basic automatic A/C)
BMW AG - TIS
04.02.2013 12:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
