7 Series E65 730d (M57TU) SAL
65 75 071
Removing and installing (replacing) module
for passenger compartment sensor
Necessary preliminary tasks:
•
Remove make-up mirror and front console insert.
Open detent lugs (1) in direction of arrow and remove module for
passenger compartment sensor (2) from front console insert (3).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) module for passenger compartment sensor
BMW AG - TIS
04.02.2013 13:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
