7 Series E65 730d (M57TU) SAL
65 77 600
Replacing sensor mat for passenger seat
occupancy detector
Warning!
US/CDN front passenger seat (with OC3 mat) only:
The padding can only be removed in conjunction with the OC3
mat.
If padding is defective, both parts may only be replaced
together.
After fitting new padding, enable OC3 mat with BMW
diagnosis system.
The operation for removing the padding with/without OC3 mat is
described in:
•
Replacing seat cover for front seat
Enabling seat occupancy detector (OC3 mat):
•
Connect BMW diagnosis system
•
Release seat occupancy detector
•
Clear fault memory if necessary
Note:
The comfort seat with air conditioning is shown.
Remove sensor mat for driver's seat occupancy detector (1) from
support (2).
Important!
To avoid malfunctions, make sure sensor mat (1) is cleanly
laid:
•
Lay plug-in connection in designated recess.
RA Replacing sensor mat for passenger seat occupancy detector
BMW AG - TIS
04.02.2013 13:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
