7 Series E65 730d (M57TU) SAL
67 31 640
Removing and installing/replacing drive for
backrest head adjustment (comfort seats in
rear compartment)
Remove rear seat.
Detach retainers (1) in area (2).
Turn back backrest cover (3) in direction of arrow slightly.
Note:
For purposes of clarity, illustration shows backrest cushion section
removed.
Disconnect plug connection (1).
Release screws (2).
Detach drive for seat head adjustment (3) from drive shaft (4)
and remove in direction of arrow.
Installation:
Make sure spacer washers (1) are correctly seated.
If necessary, fix spacer washers (1) in place on metal tabs (2) of
drive for backrest head adjustment (3).
RA Removing and installing/replacing drive for backrest head adjustment (comfort se
BMW AG - TIS
04.02.2013 13:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -