7 Series E65 740d (M67) SAL
Recycling:
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Unfasten screws.
Tightening Torque,
refer to Technical Data 12 90 4AZ.
Remove electronics box cover (1).
Disconnect plug (1).
Disconnect all plugs on DDE control units (1 and 2).
1.
DDE main control unit (master)
2.
DDE auxiliary control unit (slave)
Disconnect all plugs on EGS control unit.
Release existing cable ties.
RA Removing and installing engine (M67)
BMW AG - TIS
09.02.2013 13:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -