7 Series E65 740d (M67) SAL
11 12 595
Checking one valve guide for wear (M67)
(valve removed)
To measure tilt clearance, insert new valve so that valve stem end
is flush with valve guide.
Mount special tool 00 2 510 (dial gauge) and measure tilt
clearance.
For maximum permissible tilt clearance,
refer to Technical Data.
Note:
If tilt clearance is too great, replace cylinder head and valves.
RA Checking one valve guide for wear (M67)
BMW AG - TIS
09.02.2013 13:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -