7 Series E65 740d (M67) SAL
11 12 105
Removing and installing left cylinder head
(M67)
Notes on disconnecting and connecting battery,
refer to general information in MG12.
Disconnect battery negative terminal.
Remove fan cowl,
refer to 17 11 031 .
Drain and top up coolant,
refer to 17 00 005 .
Remove and install left camshafts,
refer to 11 31 013 .
Remove intake air manifold,
refer to 11 61 050 .
If the coolant is not completely drained from the engine block,
coolant will enter the oil sump when the cylinder head is
removed!
The cylinder head bolts must be replaced.
Removal:
Removal of cylinder head is described separately from installation.
The assembly sequence for removal and installation is different.
RA Removing and installing left cylinder head (M67)
BMW AG - TIS
09.02.2013 13:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
