7 Series E65 740d (M67) SAL
Note:
Worn rockers must be reused on the same grooves of the
camshaft.
Remove rockers (1) individually and check rollers for ease of
movement.
Place rockers (1) to one side in an orderly manner.
Pull out hydraulic valve compensation elements
(HVC elements) (2) towards top.
Place HVC elements (2) to one side in an orderly manner.
Release locks (1).
Detach water hose (2) and lay to one side.
Release clamp (1).
Remove hose (2).
Release clamp (1).
Disconnect intake pipe (2).
Unclip line (3) from holders.
Remove hose (4).
Unscrew bolt (5).
Remove intake pipe (2).
RA Removing and installing left cylinder head (M67)
BMW AG - TIS
09.02.2013 13:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
