7 Series E65 740d (M67) SAL
Release screws (1) on high-pressure pump (3).
Lay line (2) to one side.
Remove high-pressure pump (3).
Installation:
Replace O-ring (1) if damaged.
Release both screws on air pipe.
Remove air pipe (1).
Installation:
Replace O-ring (1) if damaged.
RA Removing and installing left cylinder head (M67)
BMW AG - TIS
09.02.2013 13:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
