7 Series E65 740d (M67) SAL
Installation:
Position flywheel (1) so that pressed-in sleeve (2) matches
up with adapter sleeve in crankshaft.
Installation:
- Clean all threads in crankshaft.
- Use new microencapsulated screws.
- Insert screws and tighten down diagonally and evenly.
Tightening Torque,
refer to Technical Data 11 22 1AZ.
RA Removing and installing/replacing flywheel (M67)
BMW AG - TIS
09.02.2013 14:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
