7 Series E65 740d (M67) SAL
Rotate crankshaft at vibration damper with special tool
11 6 480 until slide of special tool 11 8 182 can engage in
spline teeth.
To lock the flywheel in position:
-
Slide special tool 11 8 182 upwards as far as it will go into
flywheel spline teeth.
-
Tighten down screw.
Release screws (1) on vibration damper (2).
Installation:
Install new screws.
Tighten down screws with special tool 00 9 120 .
Tightening torque 11 23 2AZ
.
RA Removing and installing or replacing vibration damper (M67, M67TU)
BMW AG - TIS
09.02.2013 14:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
