7 Series E65 740d (M67) SAL
11 31 ...
Layout of camshafts (M67)
Note:
If the camshafts have no markings, they must (if the engine is set at TDC) be positioned as illustrated here.
Viewing direction:
Standing in front of engine against direction of travel.
Left half of picture: cylinder 1.
Right half of picture: cylinder 5.
RA Layout of camshafts (M67)
BMW AG - TIS
09.02.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
