7 Series E65 740d (M67) SAL
Replace sealing ring (1).
Caution!
Do not damage sealing faces (2 and 3).
Insert chain tensioner (1) and tighten down.
Tightening torque,
refer to Technical Data 11 31 8AZ.
Caution!
Use new screws (1).
When tightening screws (1), grip camshafts with open-end
wrench.
Tighten down screws (1).
Tightening specifications,
refer to Technical Data 11 31 4AZ.
Unscrew bolt (1).
Remove special tool 11 8 120.
RA Replacing both camshafts on left (M67)
BMW AG - TIS
09.02.2013 14:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
