7 Series E65 740d (M67) SAL
11 34 560
Replacing all valve stem seals (M67)
(cylinder head removed)
Preliminary work is described in disassembly of cylinder
head,
refer to 11 12 505.
Remove all valve springs,
refer to 11 34 055.
Press special tool 11 6 370 onto valve stem seal and turn.
Remove special tool 11 6 370 together with valve stem seal.
Lubricate valve stem and fit special tool 11 1 960.
Coat new valve stem seal (1) with oil and install.
Remove special tool 11 1 960.
Press on valve stem seal with special tool 11 6 380 as far as it
will go.
Note:
Valve stem seal must rest flush.
RA Replacing all valve stem seals (M67)
BMW AG - TIS
09.02.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
