7 Series E65 740d (M67) SAL
Loosen screws (1).
Remove acoustic cover (2).
Remove fan cowl.
Remove vibration damper.
Pull off vacuum hose (1).
Installation:
Observe arrangement of vacuum hoses.
Detach plug (2) on control valves.
Unfasten cable tie (3).
Disconnect plug (4) on double temperature switch.
Loosen screws (1).
Lay control valve unit (2) to one side.
RA Removing and installing/replacing water pump (M67)
BMW AG - TIS
09.02.2013 14:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
