7 Series E65 740d (M67) SAL
Installation:
Replace sealing ring (1) on double temperature sensor (2).
Caution!
To avoid damaging the new seal, carefully slide in water pump
at lug (1).
Note position of clamp (2).
Caution!
Screws (1 to 3) differ in length!
Position 1 = 25 mm
Position 2 = 40 mm
Position 3 = 30 mm
Assemble car.
Fill cooling system.
Vent cooling system.
RA Removing and installing/replacing water pump (M67)
BMW AG - TIS
09.02.2013 14:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -