7 Series E65 740d (M67) SAL
11 61 050
Removing and installing intake air manifold
(M67)
Necessary preliminary tasks:
•
Remove acoustic cover
Caution!
If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.
Fit charge air hoses without grease and dry.
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Release clamps (1).
Tightening torque 11 65 10AZ
.
Detach charge air hoses (2).
Caution!
Fit charge air hoses without grease and dry.
RA Removing and installing intake air manifold (M67)
BMW AG - TIS
09.02.2013 14:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
