7 Series E65 740d (M67) SAL
Release screws and remove holder (1).
Release screws and remove intake air manifold (1).
Installation:
Observe standard tightening torques of M7 screws.
Caution!
After removing the intake air manifold, it is absolutely
essential to seal the intake passages immediately against
penetration by dirt.
Clean sealing faces (1).
Remove gaskets (1).
Clean sealing surfaces.
RA Removing and installing intake air manifold (M67)
BMW AG - TIS
09.02.2013 14:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
