7 Series E65 740d (M67) SAL
Caution!
If you fail to adhere strictly to the following sequence for
converting the oil pressure line (1), this may result in oil
pressure loss and damage to the right turbocharger.
To convert oil pressure line:
1.
Determine distance (A) between oil pressure line (1) and
flange of turbocharger.
2.
Release banjo bolt (2).
Tightening torque 11 65 7AZ
.
3.
Replace sealing rings for banjo bolt (2).
4.
Attach oil pressure line (1) to new turbocharger with banjo
bolt (2).
5.
Adjust distance (A).
6.
Tighten down banjo bolt (2).
7.
Check distance (A).
RA Removing and installing or replacing right exhaust turbocharger (M67)
BMW AG - TIS
09.02.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -