7 Series E65 740d (M67) SAL
Caution!
Coolant escapes!
Recycling
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Caution!
Remove lowest screw (1) fully only at end.
Release screws on alternator.
Remove lowest screw (1) half-way.
Lay retaining plate (2) to one side.
Pull out alternator (3) a little and allow coolant to drain off.
Remove lowest screw (1) fully.
Remove alternator (3).
Installation:
Replace sealing ring (1).
RA Removing and installing/replacing alternator (M67)
BMW AG - TIS
09.02.2013 15:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -