7 Series E65 740d (M67) SAL
Release cable tie (1).
Unclip battery positive lead from cable ties.
Unscrew nut (1).
Tightening torque,
refer to Technical Data 12 31 1AZ .
Disconnect battery positive lead (2).
Installation:
Read fault memory.
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Removing and installing/replacing battery positive lead (between starter motor,
BMW AG - TIS
09.02.2013 15:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
