7 Series E65 740d (M67) SAL
13 53 565
Removing and installing/replacing pressure
sensor on fuel rail of injection system (M67)
Necessary preliminary tasks:
•
Read out fault memories of DDE control units
•
Switch off ignition
•
Remove acoustic cover
Clean fuel rail in area around pressure regulator and dry with
compressed air.
Unlock plug (1) and remove.
Grip pressure sensor (2) and release screw connection (3).
Tightening torque 13 53 12AZ
.
RA Removing and installing/replacing pressure sensor on fuel rail of injection syst
BMW AG - TIS
09.02.2013 15:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
