7 Series E65 740d (M67) SAL
13 62 535
Replacing charge-air pressure sensor (M67)
Necessary preliminary tasks:
•
Read out fault memories of DDE control units
•
Switch off ignition
•
Remove acoustic cover
Disconnect plug (1).
Undo screw (1).
Remove charge-air pressure sensor (2).
Note:
Illustration shows the intake air manifold removed.
Installation note:
-
Check sealing ring (1), replace if necessary.
-
Thinly coat sealing ring (1) with lubricant.
RA Replacing charge-air pressure sensor (M67)
BMW AG - TIS
09.02.2013 15:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
