7 Series E65 740d (M67) SAL
Replace injector,
refer to 13 53 315.
Connect disconnected injectors to pressure accumulator in
reverse sequence (8, 7, 6, 5, 4, 3, 2, 1 ). After connecting each
injector, actuate starter motor and read out "actual rail pressure
value".
"Actual rail pressure value"
≤
"Specified rail pressure value":
Replace injector connected last.
Interrogate fault memory in the DDE control unit.
Check stored fault messages.
RA Checking injectors (M67)
BMW AG - TIS
09.02.2013 15:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
