7 Series E65 740d (M67) SAL
13 71 010
Removing and installing left intake filter
housing (M67, M67TU)
Necessary preliminary tasks:
-
Read fault memory of DDE control unit
-
Switch off ignition
-
Remove intake filter
Left only:
•
Release coolant expansion tank
Unfasten screws.
Remove intake filter housing (1) towards top.
Installation:
Insert tabs (5) into openings (6).
Fold intake filter housing (1) onto raw air housing (4) and screw
down.
Make sure intake filter housing is correctly seated.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing left intake filter housing (M67, M67TU)
BMW AG - TIS
09.02.2013 15:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
