7 Series E65 740d (M67) SAL
Important!
The engine must be cooled down before the coolant level is
checked. Coolant temperature must not exceed 30
°
C. If
ambient temperature is above 30
°
C, allow engine to cool
down to ambient temperature at least.
Check coolant level and adjust to MAX.
Note:
Do not fill coolant expansion tank over MAX level as overfilling will
cause the coolant to overflow.
Cars with independent heating:
Switch off engine.
Run independent heating for 2 minutes.
Start engine and run briefly at idle speed.
Press accelerator pedal twice up to approx. 2500 rpm.
Open cap and adjust coolant level to MAX.
Close cap.
RA Venting cooling system and checking for water leaks (M67, M67TU)
BMW AG - TIS
09.02.2013 16:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -