7 Series E65 740d (M67) SAL
31 35 005
Removing and installing/replacing push rod
(stabilizer link) for left/right stabilizer
Important!
Observe safety instructions on raising the vehicle.
Note:
Stabilizer links may only be replaced in pairs.
Release nut; if necessary, grip brace at Torx socket.
Installation:
Replace self-locking nut.
Tightening torque 31 35 12AZ
.
Release nut; if necessary, grip brace at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tightening torque 31 35 13AZ
.
RA Removing and installing/replacing push rod (stabilizer link) for left/right stab
BMW AG - TIS
09.02.2013 18:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -