7 Series E65 740d (M67) SAL
Release screw (1).
Tightening torque 32 41 1AZ
.
Unscrew nuts (2).
Remove vane pump.
Installation:
Replace self-locking nuts.
Tightening torque 32 41 1AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing vane pump for power steering (M67, M67TU)
BMW AG - TIS
09.02.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
