7 Series E65 740d (M67) SAL
Remove stabilizer link from stabilizer.
Release screw.
Press air spring strut off wheel carrier and remove towards
bottom.
Installation:
Replace screw.
Tightening torque 37 12 6AZ
.
After installation:
•
Activate and fill air suspension system
-
Insert fuse in corresponding slot in fuse box
-
Connect BMW diagnosis system
-
Switch ignition on.
-
Fill rear air spring strut using BMW diagnosis system
(control unit function: activate menu items "Fill rear
left/right air spring" once)
-
Lower vehicle
RA Removing and installing / replacing rear left or right air spring strut
BMW AG - TIS
09.02.2013 20:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
