7 Series E65 740d (M67) SAL
51 21 ...
Replacing door reflector
Special tools required:
•
00 9 318
Removing:
Carefully detach reflector with special tool 00 9 318 and a hot
air blower from door.
Assembly:
For cleaning, use a fluff-free disposable cloth or a fresh cleaning
cloth.
-
Clean bonding area with spirit
-
Air drying time at least 1 minute.
-
Pull off liner
-
Stick reflector onto door as shown in following illustrations
-
Press on reflector firmly
The adhesion of the adhesive tape is increased considerably by
contact pressure therefore press down over the entire area with
your thumbs and backs of hands.
* Liner is protective film for bonding area.
Front door:
Stick reflector (1) at spacings (A) and (B) onto front door.
A= 1 mm
B = 1 mm
2
Seal
3
Cover on door window frame
RA Replacing door reflector
BMW AG - TIS
09.02.2013 23:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -