7 Series E65 740d (M67) SAL
51 24 ...
Removing and installing/replacing Bowden
cable for rear lid lock (up to 03/2005)
Necessary preliminary tasks:
•
Remove lock element (lock cylinder) for rear lid
Lever out securing plugs (1).
Lever out catches (2) and remove Bowden cable guide (3).
Unlock catch (1) and detach Bowden cables (2 and 3) from
rear lid lock upper section (6).
Lever out expanding wedge (4) and detach guide (5).
Version with manual unlocking:
Installation:
Bowden cable (2) must be correctly positioned in guide (5).
Release lock (1) from Bowden cable (2) and remove clip (3).
Feed out Bowden cable (2) from rear lid.
Installation:
Lock (1) must be correctly fitted.
RA Removing and installing/replacing Bowden cable for rear lid lock (up to 03/2005)
BMW AG - TIS
09.02.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
