7 Series E65 740d (M67) SAL
Release screw (1) and remove expansion rivet.
Detach mucket (2) in area of side trim (5).
Release screw (3).
Unclip side trim (5) from clips (4) and remove.
Installation:
Following parts of side trim panel (4) must not be damaged or
missing:
1
Clips
2
Cover cap with retaining strap
3
Insulating mat
RA Removing and installing / replacing side trim panel, footwell, on A-pillar, left
BMW AG - TIS
10.02.2013 00:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
