7 Series E65 740d (M67) SAL
64 11 816
Replacing servodrive for left cold air duct
(automatic A/C High)
Necessary preliminary tasks:
•
Remove function carrier on trim for instrument carrier
Press lock (1) and unclip servodrive (2) in direction of arrow.
Disconnect plug connection (3) and remove servodrive (2).
Installation:
If necessary, align shaft of flap(s) to be actuated to position of
servodrive to be installed.
RA Replacing servodrive for left cold air duct (automatic A/C High)
BMW AG - TIS
10.02.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
