7 Series E65 740d (M67) SAL
Disconnect plug connection (1).
Release screws (2).
Detach drive for seat longitudinal/tilt adjustment (2) from drive
shafts (4) and feed out in direction of arrow.
Installation:
Make sure drive shafts (4) are correctly seated.
Replacement:
Initialize drive for seat longitudinal/tilt adjustment.
RA Removing and installing/replacing drive for seat longitudinal/tilt adjustment (c
BMW AG - TIS
10.02.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
