7 Series E65 740i (N62TU) SAL
11 37 014
Removing and installing/replacing right
intermediate levers (N62 from 9/03 and
N62TU)
Special tools required:
•
11 9 470
•
11 9 472
•
11 9 473
•
11 9 474
•
11 9 475
•
11 9 480
•
11 9 490
(cylinder bank 1 to 4)
Removal of intermediate levers is described separately from
installation.
Necessary preliminary tasks:
•
Remove servomotor fro right eccentric shaft
•
Remove ignition coils on cylinder bank 1 to 4
•
Remove right cylinder head cover
•
Remove spark plugs on cylinder bank 1 to 4
•
Remove right inlet and exhaust adjustment units
Important!
The inlet camshaft must first be rotated so that when the
bearing bracket is removed the intermediate levers do not slip
out and damage the camshaft.
RA Removing and installing/replacing right intermediate levers (N62 from 9/03 and N
BMW AG - TIS
11.02.2013 02:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
