7 Series E65 740i (N62TU) SAL
11 31 070
Checking camshaft timing on left side
(N62/N62TU)
Special tools required:
•
11 9 190
•
11 9 461
•
11 9 462
(cylinder bank 5 to 8)
Necessary preliminary tasks:
•
Remove servomotor for left eccentric shaft
•
Remove left cylinder head cover
Remove all spark plugs on cylinder bank 5 to 8.
If necessary, remove fan cowl.
Important!
Screw (1) is a special screw and must not be replaced with a
normal M8 screw.
Release screw (1).
Unclip oil line (3) from retainers (2) and remove.
Crank engine at central bolt in direction of rotation to firing TDC
position of 1st cylinder.
Note:
With 1st cylinder in firing TDC position, cams of inlet and exhaust
camshafts at 5th cylinder point upwards at an angle as shown in
illustration.
RA Checking camshaft timing on left side (N62/N62TU)
BMW AG - TIS
11.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
