7 Series E65 740i (N62TU) SAL
Important!
If the inlet or exhaust adjustment unit of the camshafts
"cannot" be locked as described, the adjustment unit is faulty
and must be replaced.
Place special tool 11 9 461 on inlet camshaft and check timing.
Note:
The timing is correctly adjusted when special tool 11 9 461
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Remove special tool 11 9 461 from inlet camshaft.
Place special tool 11 9 462 on exhaust camshaft and check
timing.
Note:
The timing is correctly adjusted when special tool 11 9 462
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
If necessary, adjust camshaft timing on left side.
Remove all special tools.
RA Checking camshaft timing on left side (N62/N62TU)
BMW AG - TIS
11.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -